Find Antenna
Find Military Product Choose Frequency
From To
Choose Antenna Type
MT-346004/N
2.3-2.9 GHz 24 dBi LINEAR POLARITY GRID ANTENNA
ELECTRICAL
REGULATORY COMPLIANCE ETSI EN 301 525 V1.1.1 (2000-06) Range 1, RoHS , CE 0682
FREQUENCY RANGE 2.3 – 2.9 GHz
GAIN 23dBi (min) @ 2.3 to 2.4 GHz
23.5 dBi (min) @ 2.4 to 2.5 GHz
24 dBi (min) @ 2.5 to 2.9 GHz
VSWR 1.7 : 1 (typ), 2 : 1 (max)
POLARIZATION Linear
3dB ELEVATION BEAMWIDTH 10º (typ)
3dB AZIMUTH BEAMWIDTH 8º (typ)
SIDELOBES LEVEL ETSI EN 301 525 V1.1.1 (2000-06) TS2, TS3
F/B RATIO ETSI EN 301 525 V1.1.1 (2000-06) TS2, TS3
CROSS POLARIZATION ETSI EN 301 525 V1.1.1 (2000-06) TS2, TS3
POWER 10 W (max)
INPUT IMPEDANCE 50 (ohm)
MECHANICAL
DISH FOCAL LENGTH 354 mm
DIMENSIOMS OF REFLECTOR (HxW) 905 x 705 mm
CONNECTOR N-Type Female
CABLE 150 mm RG58 w
WEIGHT 3.3 (kg)
MOUNTING KIT Included
RADOME MATERIAL N/A
DISH MATERIAL Die cast Aluminum
OUTLINE DRAWING See Below
ENVIRONMENTAL
TEST STANDARD DURATION TEMPERTURE NOTES
LOW TEMPERATURE MIL-STD-810E 502.3 PROC. I 48 h -30°C
HIGH TEMPERATURE MIL-STD-810E 501.3 PROC. I 48 h +70°C
TEMP. CYCLING MIL-STD-810E 502.3 PROC. I 16 Cycles  -30°C +70°C  
VIBRATION MIL-STD-810E 514-4 CAT.8 30 min/axis  
SHOCK MECHANICAL MIL-STD-810E 516-4 PROC. I
RAIN  MIL-STD-810E 506-3 PROC. I
WATER TIGHTNESS MIL-STD-810E 506-3 PROC. I IP65
SOLAR RADIATION       Min 8 Years 
FLAMMABILITY  UL 94     Class HB
SALT SPRAY IEC 68-2-11 Ka 168 h    
ICE AND SNOW       25mm Radial
WIND SPEED SURVIVAL OPERATION      

 220 Km/h

 

WIND LOAD (SURVIVAL)

FRONT THRUST

SIDE THRUST

     

160 Km/h

Azimuth Radiation Pattern Midband

 Freq. 2.5 GHz

Elevation Radiation Pattern Midband

Freq. 2.5 GHz

 
 
 
  

 

WAIVER!
While the information contained in this document has been carefully compiled to the best of our present knowledge, it is not intended as presentation or warranty of any kind on our part regarding the fitness of the products concerned for any particular use or purpose and neither shall any statement contained herein be construed as a recommendation to infringe any industrial property rights or as a license to use any such rights. The fitness of each product for any particular purpose must be checked beforehand with our specialists.

Print