Find Antenna
Find Military Product Choose Frequency
From To
Choose Antenna Type
MT-403010/S
3.3-3.8 GHz 12 dBi LINEAR V/H POLARITY INDOOR ANTENNA UNIT
ELECTRICAL
REGULATORY COMPLIANCE RoHS, CE 0682
FREQUENCY RANGE 3.3-3.8 GHz
GAIN 11 dBi (min) @ 3.3-3.4 GHz
12 dBi (min) @ 3.4-3.8 GHz
VSWR 2 : 1 (max)
POLARIZATION Linear (Vertical or Horizontal)
3dB ELEVATION BEAMWIDTH 13.5° (typ)
AZIMUTH BEAMWIDTH @ 8dBi @3.3-3.4 Ghz
AZIMUTH BEAMWIDTH @ 9dBi @3.4-3.8 Ghz
85° (typ)
ELEVATION SIDELOBE LEVEL -8 dB (max)
F/B RATIO -19dB (max)
POWER 6W (max)
INPUT IMPEDANCE 50 (ohm)
LIGHTNING PROTECTION DC Grounded
MECHANICAL
DIMENSIONS (LxWxD) 325x92x15mm (max)
CONNECTOR SMA - Female
AZIMUTH ADJUSTMENT ±45°
TILT ADJUSTMENT ±15°
PLASTIC MATERIALS P.C+ABS
RF CABLE ACCESSORIES See Below
INSTALLATION OPTION See Below
OUTLINE DRAWING RD41483200C
ENVIRONMENTAL
TEST STANDARD DURATION TEMPERTURE NOTES
LOW TEMPERATURE IEC 68-2-1 72 h -20°C
HIGH TEMPERATURE IEC 68-2-2 72 h +55°C
TEMP. CYCLING IEC 68-2-14 1 h -10°C +55°C 3 Cycles
VIBRATION IEC 60721-3-4 30 min/axis Random4M3
SHOCK MECHANICAL IEC 60721-3-4 4M3
HUMIDITY ETSI EN300-2-4 T4.1E 144 h 50%
WATER TIGHTNESS IEC 529 IP32
SOLAR RADIATION  ASTM G53  1000h    
FLAMMABILITY  UL 94      VO

INSTALLATION

 

3 Vacuum cap for window installation (Supplied with antenna)

Table position (A dummy load supplied with antenna)

Adhesive tape for window installation (Tape not supplied with antenna)

Wall installation with screws (Hardware not supplied with antenna)

#

MTI P/N

Cable length

Free End conn

Attenuation @ 3.5GHz

1

MT-850001/M/A 2 Meter MCX male 3.6 dB
2 MT-850001/M/B 3 Meter MCX male 5.4 dB
3 MT-850004/S/A 2 Meter SMA male 3.6 dB
4   MT-850005/S/A 2 Meter SMA F R.P 3.6 dB

 

 

Azimuth Radiation Pattern Midband

 Freq. 3.5 GHz

Elevation Radiation Pattern Midband

Freq. 3.5 GHz

 
 
 
 
  

WAIVER!

While the information contained in this document has been carefully compiled to the best of our present knowledge, it is not intended as presentation or warranty of any kind on our part regarding the fitness of the products concerned for any particular use or purpose and neither shall any statement contained herein be construed as a recommendation to infringe any industrial property rights or as a license to use any such rights. The fitness of each product for any particular purpose must be checked beforehand with our specialists.

Print