Find Antenna
Find Military Product Choose Frequency
From To
Choose Antenna Type
MT-404081/ND
3.3-3.8 GHz 17 dBi 65º DOUBLE DUAL SLANT POLARITY SECTOR ANTENNA
ELECTRICAL
REGULATORY COMPLIANCE ETSI EN 302 326- V1.1.2 (2006-03) RoHS , CE 0682
FREQUENCY RANGE 3.3-3.8 GHz
GAIN 17±0.5 dBi (min)
VSWR 1.5 : 1 (typ) 1.8 : 1 (max)
POLARIZATION Double Dual Linear ± 45°
3dB ELEVATION BEAMWIDTH 7.5º (typ)
13.5 dBi AZIMUTH BEAMWIDTH 65º
AZIMUTH SIDELOBE LEVEL Meets ETSI EN 302 326 V.1.1.2 (2006-03)
ELEVATION SIDELOBE LEVEL Meets ETSI EN 302 326 V.1.1.2 (2006-03)
SIDE LOBES LEVEL FOR AZIMUTH IN THE RANGE
(± 100 TO ± 180 FROM BORESIGHT)
-25dB (max) @ 3.3-3.5GHz
-30dB (max) @ 3.5-3.8GHz
FRONT TO BACK ETSI EN 302 326 V.1.1.2 (2006-03)
-30dB (max)
CROSS POLARIZATION ETSI EN 302 326 V.1.1.2 (2006-03)
PORT TO PORT ISOLATION 25 dB (min)
POWER 20 W (max)
INPUT IMPEDANCE 50 (ohm)
LIGHTNING PROTECTION DC Grounded
MECHANICAL
DIMENSIONS (LxWxD) 600 x 270 x 63 mm (max)
CONNECTOR 4 x N-Type Female
MECHANICAL DOWN TILT 0º to -10º
WEIGHT 2.7 (kg)
MOUNTING KIT MT-120025
RADOME MATERIAL Plastic
BASE PLATE MATERIAL Aluminum with chemical conversion coating
ENVIRONMENTAL
TEST STANDARD DURATION TEMPERTURE NOTES
LOW TEMPERATURE IEC 68-2-1 72 h -55°C
HIGH TEMPERATURE IEC 68-2-2 72 h +71°C
TEMP. CYCLING IEC 68-2-14 1 h -45°C +70°C 3 Cycles
VIBRATION IEC 60721-3-4 30 min/axis Random4M5
SHOCK MECHANICAL IEC 60721-3-4 4M5
HUMIDITY ETSI EN300-2-4 T4.1E 144 h 95%
WATER TIGHTNESS IEC 529 IP54
SOLAR RADIATION  ASTM G53  2000h    
FLAMMABILITY  UL 94      Class HB
SALT SPRAY IEC 68-2-11 Ka 500h    
ICE AND SNOW       25mm Radial
WIND SPEED SURVIVAL OPERATION      

 220 Km/h

160 Km/h

WIND LOAD (SURVIVAL)

FRONT THRUST

SIDE THRUST

     

51.4 kg

10.8 kg

Azimuth Radiation Pattern Midband

 Freq. 3.3 GHz

Elevation Radiation Pattern Midband

Freq. 3.3 GHz

 
 
 
 

  

 

WAIVER!

While the information contained in this document has been carefully compiled to the best of our present knowledge, it is not intended as presentation or warranty of any kind on our part regarding the fitness of the products concerned for any particular use or purpose and neither shall any statement contained herein be construed as a recommendation to infringe any industrial property rights or as a license to use any such rights. The fitness of each product for any particular purpose must be checked beforehand with our specialists.

Print