Find Antenna
Find Military Product Choose Frequency
From To
Choose Antenna Type
MT – 464044/NVH - Preliminary
5.7 – 6.4 GHz, 16.0 dBi 60° Dual Polarization Sector Antenna
ELECTRICAL
REGULATORY COMPLIANCE ETSI EN 302 326-3 V.1.3.1 (2008-02)
FREQUENCY RANGE 5.7 – 6.4 GHz
GAIN PORT V: 16 dBi (min)
PORT H: 15dBi
VSWR 1.7 : 1 (max)
POLARIZATION Dual Horizontal & Vertical
3dB ELEVATION BEAMWIDTH 10° ± 1°
3dB AZIMUTH BEAMWIDTH ETSI EN 302 326-3 V.1.3.1 SS3 60° ±4° @ 13dBi
ETSI EN 302 326-3 V.1.3.1 SS3 60° -4° / +7° @12dBi
SIDELOBES LEVEL -30 dB (max) @ ± 90°
F/B RATIO -30 dB (max)
CROSS POLARIZATION ETSI EN 302 326-3 V.1.3.1 SS3
-24dB (max)
POWER 6W (max)
INPUT IMPEDANCE 50 (ohm)
ELEVATION NULL FILL ETSI EN 302 326-3 V.1.3.1 SS3
1st Null -15 dB (min) at 10°
2nd Null -25 dB (min) at 20°
LIGHTNING PROTECTION DC Grounded
MECHANICAL
DIMENSIONS (LxWxD) 436x250x10mm (max)
CONNECTOR 2 xN-Type Female
WEIGHT 2.2 kg (max)
MOUNTING KIT MT-120025
RADOME MATERIAL Plastic
BASE PLATE MATERIAL Aluminum with chemical conversion coating
ENVIRONMENTAL
TEST STANDARD DURATION TEMPERTURE NOTES
LOW TEMPERATURE MIL-STD-810E 502.3 PROC. I 48 h -30°C
HIGH TEMPERATURE MIL-STD-810E 501.3 PROC. I 48 h +70°C
TEMP. CYCLING MIL-STD-810E 502.3 PROC. I 16 Cycles  -30°C +70°C  
VIBRATION MIL-STD-810E 514-4 CAT.8 1 Hrs  
SHOCK MECHANICAL MIL-STD-810E 516-4 PROC. I

3 Blows

10 Ms

RAIN  MIL-STD-810E 506-3 PROC. I
WATER TIGHTNESS MIL-STD-810E 506-3 PROC. I IP65
SOLAR RADIATION       Min 8 Years 
FLAMMABILITY  UL 94     Class HB
SALT SPRAY IEC 68-2-11 Ka 168 h    
ICE AND SNOW       25mm Radial
WIND SPEED SURVIVAL OPERATION      

120 Km/h

 

WIND LOAD (SURVIVAL)

FRONT THRUST

SIDE THRUST

     

31.4 kg

1.3 kg

 

Azimuth Radiation Pattern Midband

 Freq. 6 GHz

Elevation Radiation Pattern Midband

Freq. 6 GHz

 
 
 

  

 

 

WAIVER!

While the information contained in this document has been carefully compiled to the best of our present knowledge, it is not intended as presentation or warranty of any kind on our part regarding the fitness of the products concerned for any particular use or purpose and neither shall any statement contained herein be construed as a recommendation to infringe any industrial property rights or as a license to use any such rights. The fitness of each product for any particular purpose must be checked beforehand with our specialists.

Print