Find Antenna
Find Military Product Choose Frequency
From To
Choose Antenna Type
MT-2045/D
0.4 - 1.2GHz BLADE ANTENNA
ELECTRICAL
ANTENNA TYPE Wide Band Sleeve Blade Monopole
FREQUENCY RANGE 0.4 to 1.2GHz
GAIN* See Table Below
PEAK GAIN See Table Below
VSWR See Table Below
POLARIZATION Vertical
-3dB ELEVATION BEAMWIDTH 65° (min) @ 0.4 GHZ
40° (min) @ 0.5-0.75 GHZ
35° (min) @ 0.75-1.2 GHZ
-10 dB ELEVATION BEAMWIDTH 132° (min) @0.4 GHz<BR>75° (min) @ 0.5 to 0.75 GHz<BR>60° (min) @ 0.75 to 1.2 GHz)
3dB AZIMUTH BEAMWIDTH OMNIDIRECTIONAL
POWER HANDLING Receive only
MECHANICAL
DIMENSIONS (LxWxD) 101.5x54.6*112.3 mm
CONNECTOR N-Type Female
WEIGHT 310g (max)
COLOR MIL-C-83286 GRAY #36375
BASE PLATE MATERIAL Aluminum with chemical conversion coating
OUTLINE DRAWING RD40327500M
ENVIRONMENTAL
TEST STANDARD DURATION TEMPERTURE NOTES
LOW TEMPERATURE MIL-STD-810 METHOD 502.2 PROC. I 24 h -54°C
HIGH TEMPERATURE MIL-STD-810 METHOD 501.2 PROC. I 96 h +85°C
TEMPERATURE / ALTITUDE MIL-STD-810C METHOD 504.1 PROC. I 33H

-57 ¸ 85 ° C

55,000 ft
 
TEMP SHOCK  MIL-STD-810D METHOD 503.2   2 h  -54°C +75°C  3 Cycles
VIBRATION MIL-STD-810E Fig 514.4-7 (a)  3*1 min/axis

Li=0.6 g²/Hz,

 F1=68 Hz

 
SHOCK MECHANICAL MIL-STD-810D METHOD 516.2 PROC. I
HUMIDITY MIL= SRD-810D METHOD 507.2 PROC. I for hot-humid (cycle 1) 95% 
SALT SPRAY MIL-STD-810D METHOD 509.2 PROC. I 48 h 5% NaCl  
SIDE PRESSURE     6 psi   
ENDURANCE  MIL-STD-810E Fig 514.4-7 (a)   3*1 min/axis  

Li=0.6 g²/Hz,

F1=68 Hz

 
 

 

   

  PEAK GAIN *  

F(MHz)

 

dBi (min)

   400  2
 450  2.5
 500  4
 1000  4
 1200  1.5
 GAIN @± 65º EL (from zenith) *  

F(MHz)

 
 
 

dBi (min)

   400  2
 500  3
 750  1.5
 1000  2
 1200  1
  VSWR  

F(MHz)

    VSWR
   400   4:1
 450   4:1
 500   2.5:1 
 1000  2.5:1
 1200  3:1 


* Gain measured on 1 meter radius ground plane

 

Elevation Radiation Pattern Midband

Freq. 1 GHz

 
 

  

 

WAIVER!

While the information contained in this document has been carefully compiled to the best of our present knowledge, it is not intended as presentation or warranty of any kind on our part regarding the fitness of the products concerned for any particular use or purpose and neither shall any statement contained herein be construed as a recommendation to infringe any industrial property rights or as a license to use any such rights. The fitness of each product for any particular purpose must be checked beforehand with our specialists.

Print