|
|
MT-141013/V
20-100 MHz VHF HIGH POWER OMNI DIRECTIONAL ANTENNA |
|
|
| ELECTRICAL |
| FREQUENCY RANGE |
20 - 100 MHz
|
| INSTANTANEOUS BANDWIDTH |
80 MHz
|
| GAIN |
Unity
|
| VSWR |
5:1(max) at 20-22 MHz
3.5:1(max) at 22-100 MHz
(measured on large ground plane)
|
| POLARIZATION |
Vertical
|
| AZIMUTH PATTERN |
OMNI Directional
|
| POWER HANDLING |
1.5kW CW
|
| INPUT IMPEDANCE |
50 (ohm)
|
| MECHANICAL |
| ANTENNA HEIGHT |
1520 mm
|
| CONNECTOR |
Recessed N-Type jack
|
| WEIGHT |
5kg
|
| SPEED |
240 knots (max)
|
| MOUNTING KIT |
Aluminum flange with 4 x 10.5 mm holes equidistant on 114.3 mm diameter circle
|
| WHIP BOLTING PARTS |
Stainless steel
|
| BASE PLATE MATERIAL |
Fiberglass epoxy
|
| WHIP MATERIAL |
Composite Laminate (Graphite)
|
| ENVIRONMENTAL |
| TEMPERATURE OPERATING |
-54ºC to +71ºC
|
| STORAGE TEMPERATURE |
-21ºC to +71ºC
|
| SHOCK |
-54ºC to +55ºC, transition 5 minutes per MIL-STD-810F, method 503.4, proc. I
|
| FUNCTIONAL SHOCK |
Saw tooth pulse 6g - 11msec, 3 axis, 3 shocks in each axis
|
| VIBRATION |
15-1000 Hz, 0.062 g²/Hz max, per MIL-STD-810F, method 514.5
|
| HUMIDITY |
Per MIL-STD-810F, method 507.4, , 5 cycles, 48 hours each
|
| RAIN |
Per MIL-STD-810F, method 506.4, proc. I, wind velocity 18m/sec and 33m/sec
|
| ICING |
Per MIL-STD-810F, method 521.2
|
| ALTITUDE: OPERATING |
35,000 ft (max)
|
| ALTITUDE:TEMPERTURE |
Per MIL-STD-810F, method 520.2, proc. III, 10 cycles
|
| ACCELARATION |
Operational
Per MIL-STD-810F, method 513.5, proc. I and proc. II
Yaw – 3.6g
Down – 3g
Up – 6.5g
Aft – 6g
Fore – 2g
Structural
Yaw – 3.6g
Down – 10.5g
Up – 6.5g
Aft – 8g
Fore – 4.6g
|
| FUNGUS |
Per MIL-STD-810F, method 508.5
|
| EXPLOSIVE ATMPOSPHERE |
Per MIL-STD-810F, method 511.4, proc. I
Fuel “n-hexane”
Step 1 – altitude 0 ft, temperature +55ºC
Step 2 – altitude 15,000 ft, temp.+55ºC
|
| SALT FOG |
Per MIL-STD-810F, method 509.4, proc. I and proc. II
|
| SAND AND DUST |
Per MIL-STD-810F, method 510.4, proc. I and proc. II
|
| SOLAR RADIATION |
0 to1120 Watt/m² per MIL-STD-810F, method 505.4
|
| CONTAMINATION BY FLUIDS |
Withstands the exposal to the followingoils/liquids:<BR>Motor oil 1250<BR>Hydraulic Oil
|
|
WAIVER!
While the information contained in this document has been carefully compiled to the best of our present knowledge, it is not intended as presentation or warranty of any kind on our part regarding the fitness of the products concerned for any particular use or purpose and neither shall any statement contained herein be construed as a recommendation to infringe any industrial property rights or as a license to use any such rights. The fitness of each product for any particular purpose must be checked beforehand with our specialists. |
Print
|
|
