Find Antenna
Find Military Product Choose Frequency
From To
Choose Antenna Type
MT – 442201/V/A
5.5- 18 GHz, 5dBi PHASED ARRAY ANTENNA
ELECTRICAL
ANTENNA TYPE Linear Vivaldi phased array of 8 active elements covering 90°AZ and 40° EL and 2 secondary elements
FREQUENCY RANGE 5.5 -18 GHz
GAIN TRACKING BETWEEN ELEMENTS 2 dB (max)
VSWR 2.5:1 (typ) ( In array), 3.5:1 (max)
PEAK GAIN (FOR ANY ACTIVE ELEMENT IN ARRAY) 2.0dBi@5.5GHz
3.0dBi@7GHZ
5.0dBi@10GHZ
7.0dBi@15GHZ
7.0dBi@18GHZ
POLARIZATION Vertical
BEAM WIDTH 150° min @ 5.5 GHz
130° min @ 7 GHZ
100° min @10 GHZ
90° min @15 GHZ
70° min @ 18 GHZ
F/B RATIO 10 dB (max)
POWER 20W (max) at each connector input.
INPUT IMPEDANCE 50 (ohm)
LIGHTNING PROTECTION None
PHASE TRACKING BETWEEN ANY TWO ANTENNAS 15 ° (max)
MECHANICAL
DIMENSIONS (LxWxD) 145 x 65 x 63
SPACING BETWEEN ELEMENTS IN ARRAY 13.5 mm
CONNECTOR 10 x BMA Female (snap-on connector)
WEIGHT 1.4 kg (max)
TEST STANDARD DURATION TEMPERTURE NOTES  
LOW TEMPERATURE
MIL-STD-810F 
Method 501.3
Procedure I&II

24 h

-54°C

HIGH TEMPERATURE
MIL-STD-810F 
Method 501.3
Procedure I&II

 96 h

 +100°C

 
TEMPERTURE SHOCK
MIL-STD-810E 
Method 503.3

 2 h

-45 to +100°C

  3 Cycles

VIBRATION
MIL-STD-810F 
Method 514.5
 

 3x1

hours/axis

 

  Grms=23G

Fig 514.5C-8

 

MECHANICAL SHOCK
MIL-STD-810D 
Method 516.4
Procedure I

11

msec /axis

  3X18g/axis

 
HUMIDITY

Mil-STD-810E
method 507.3,
Procedure I

98% RH@ 45 °C

240h

98%

10 Cycles

of 24 Hours

SALT SPRAY MIL-STD-810E
method 509.3,
Procedure I

48 Hr

   5%NaCl

 

SAND  
MIL-STD-810E 
Method 510.3
Procedure II
 
     
DUST  MIL-STD-810E 
Method 510.3
Procedure I
  
     
FUNGUS 
MIL-STD-810E 
Method 508.4
   

 

 

 

 

Azimuth Radiation Pattern Midband

 Freq. 6 GHz

Elevation Radiation Pattern Midband

Freq. 6 GHz

 
 

 

 

 

WAIVER!

While the information contained in this document has been carefully compiled to the best of our present knowledge, it is not intended as presentation or warranty of any kind on our part regarding the fitness of the products concerned for any particular use or purpose and neither shall any statement contained herein be construed as a recommendation to infringe any industrial property rights or as a license to use any such rights. The fitness of each product for any particular purpose must be checked beforehand with our specialists.

Print