Find Antenna
Find Military Product Choose Frequency
From To
Choose Antenna Type
MT-446004/N
4.4 – 5.0 GHz, 26 dBi DIRECTIONAL ANTENNA
ELECTRICAL
REGULATORY COMPLIANCE RoHS, CE 0682
FREQUENCY RANGE 4.4 – 5.0 GHz
GAIN 26.0 dBi (min)
VSWR 1.5 : 1 (typ), 1.7:1 (max)
POLARIZATION Linear (Vertical or Horizontal)
3dB ELEVATION BEAMWIDTH 6° (typ)
SIDELOBES LEVEL 1st - 10 dB (max)
2nd - 15 dB (max)
3rd - 17 dB (max)
F/B RATIO -40 dB (max)
CROSS POLARIZATION - 20 dB (max)
CROSS POLARZATION DISCRIMINATION - 30 dB (max)
POWER 10 W (max)
INPUT IMPEDANCE 50 (ohm)
MECHANICAL
DIMENSIONS (LxWxD) 640 x 640 x 71 mm (max)
CONNECTOR N-Type Female
WEIGHT 5.7 kg (max)
INSTALLATION HARDWARE All installation hardware are stainless steel with black oxide finish (the hardware include 4 studs
RADOME MATERIAL Plastic
COLOR Polyurethan Per MIL-C – 83286, Green 34094 Per FED-STD-595B
BASE PLATE MATERIAL Aluminum with chemical conversion coating
OUTLINE DRAWING RD42395700M
ENVIRONMENTAL
TEST STANDARD DURATION TEMPERTURE NOTES
LOW TEMPERATURE MIL-STD-810E METHOD 501.3 PROC. I & II 72 h -40°C
HIGH TEMPERATURE MIL-STD-810E METHOD 501.3 PROC. I & II 24 h +60°C
VIBRATION LOOSE CARGO MIL-STD-810F Meth 514.4 proc. II cate' 5 Fig 514.5C-5 , Table 514.5C-I 

36 min/axis

2 axis

 

 
SHOCK MECHANICAL

MIL-STD-810F METHOD 516.5

FIG 507.4-1  

Drop Height 48

26 Drops

 
HUMIDITY MIL-STD-810F METHOD 507.4 PROC. IV

10 cycles

of 24 hr

10cy x 24hr

SALT SPRAY MIL-STD-810F METHOD 509.4 2*24 h  
WATER TIGHTNESS       IP65 
SAND AND DUST  MIL-STD-810F METHOD 510.4 PROC. I & II 

Blowing sand 9 hr

Blowing sand 6 hr

 

 
 

Azimuth Radiation Pattern Midband

 Freq. 4.8 GHz

Elevation Radiation Pattern Midband

Freq. 4.8 GHz

 
 

  

 

WAIVER!

While the information contained in this document has been carefully compiled to the best of our present knowledge, it is not intended as presentation or warranty of any kind on our part regarding the fitness of the products concerned for any particular use or purpose and neither shall any statement contained herein be construed as a recommendation to infringe any industrial property rights or as a license to use any such rights. The fitness of each product for any particular purpose must be checked beforehand with our specialists.

Print
The information on this web site is disclosed pursuant to Rule 26 of the AIM Rules for Companies