Find Antenna
Find Military Product Choose Frequency
From To
Choose Antenna Type
MT-482015/N/A
5.725-5.925GHz 10.5dBi VERTICAL POLARITY ULTRA LOW-COST OMNI DIRECTIONAL ANTENNA
ELECTRICAL
FREQUENCY RANGE 5.725-5.925GHz
PEAK GAIN 10.5 dBi (min)
GAIN + AZIMUTH RIPPPLE 10 ± 1 dB
VSWR 1.7:1 (max) 1.5:1 (typ) @ 5.725-5.875 GHz
2:1 (max) @ 5.875-5.925 GHz
POLARIZATION Linear Vertical
E-PLANE BEAM WIDTH 6.5º (typ)
E-PLANE SIDELOBES -10 dB (max)
3dB AZIMUTH BEAMWIDTH Omni
POWER 6W (max)
INPUT IMPEDANCE 50 (ohm)
LIGHTNING PROTECTION DC Grounded
MECHANICAL
DIMENSIONS (D x H) 16mm X 460mm (max)
CONNECTOR N-Type Female
WEIGHT 0.5 kg (max)
MOUNTING KIT Mounted to radio’s N-female output
RADOME MATERIAL Plastic, UV Resistant
BASE PLATE MATERIAL Aluminum with chemical conversion coating
OUTLINE DRAWING See Below
ENVIRONMENTAL
TEST STANDARD DURATION TEMPERTURE NOTES
LOW TEMPERATURE IEC 68-2-1 72 h -55°C
HIGH TEMPERATURE IEC 68-2-2 72 h +71°C
TEMP. CYCLING IEC 68-2-14 1 h -45°C +70°C 3 Cycles
VIBRATION IEC 60721-3-4 30 min/axis Random4M5
SHOCK MECHANICAL IEC 60721-3-4 4M5
HUMIDITY ETSI EN300-2-4 T4.1E 144 h 95%
WATER TIGHTNESS IEC 529 IP67
SOLAR RADIATION  ASTM G53  2000h    
FLAMMABILITY  UL 94      Class HB
SALT SPRAY IEC 68-2-11 Ka 500h    
ICE AND SNOW       25mm Radial
WIND SPEED SURVIVAL OPERATION      

 220 Km/h

160 Km/h

WIND LOAD (SURVIVAL)

FRONT THRUST

SIDE THRUST

     

39.6 kg

4.3 kg

Azimuth Radiation Pattern Midband

 Freq. 5.825 GHz

Elevation Radiation Pattern Midband

Freq. 5.825 GHz

 

  

 

WAIVER!

While the information contained in this document has been carefully compiled to the best of our present knowledge, it is not intended as presentation or warranty of any kind on our part regarding the fitness of the products concerned for any particular use or purpose and neither shall any statement contained herein be construed as a recommendation to infringe any industrial property rights or as a license to use any such rights. The fitness of each product for any particular purpose must be checked beforehand with our specialists.

Print