Find Antenna
Find Military Product Choose Frequency
From To
Choose Antenna Type
MT-262024/TRH/A/K
902 - 928 MHz, 7.5 dBic RHCP READER ANTENNA
ELECTRICAL
REGULATORY COMPLIANCE RoHS, CE 0682
FREQUENCY RANGE 902 - 928 MHz
GAIN 7.5 dBic (min)
VSWR 1.3 :1 (typ) , 1.5 : 1(max)
POLARIZATION RHCP
3dB ELEVATION BEAMWIDTH 72° (typ)
3dB AZIMUTH BEAMWIDTH 77° (typ)
F/B RATIO -14 dB (typ)
POWER 6W (max)
INPUT IMPEDANCE 50 (ohm)
AXIAL RATIO AT BORESIGHT 3.5 dB (max)
AXIAL RATIO @ ± 20º 3.5dB (typ) 4dB (max)
LIGHTNING PROTECTION DC Grounded
MECHANICAL
DIMENSIONS (LxWxD) 190 x 190 x 30mm (max)
CONNECTOR TNC female Reverse polarity
WEIGHT 0.8 (Kgs) (max)
MOUNTING KIT SEE RD41191800C
RADOME MATERIAL Plastic
BASE PLATE MATERIAL Aluminum with chemical conversion coating
OUTLINE DRAWING RD42241100C
ENVIRONMENTAL
TEST STANDARD DURATION TEMPERTURE NOTES
LOW TEMPERATURE IEC 68-2-1 72 h -55°C
HIGH TEMPERATURE IEC 68-2-2 72 h +71°C
TEMP. CYCLING IEC 68-2-14 1 h -45°C +70°C 3 Cycles
 

THERMAL SHOCK   

NONO-OPERATING
    -30°C to+70°C   Ramp 30°C/min
HUMIDITY ETSI EN300-2-4 T4.1E   144 h   95%
WATER TIGHTNESS IEC 529 IP67
DUST RESISTANCE       IP67
SOLAR RADIATION  ASTM G53 1000h    
OZONE RESISTANCE ETSI 300      
FLAMMABILITY UL 94     Class HB
SALT SPRAY  IEC 68-2-1 Ka   500 h    
QUASI RANDOM VIBRATION 20g rms for 4 hours

VEHICLE VIBRATION

OPERATING

1 grms, 10-500 Hz, in 3 axis

    6 hours total, 2 hr in each axis. Accelerated wear – an additional 50hrs in worst case axis.

MECHANICAL SHOCK   

OPERATING
10g,11msec,  half sine pulse    

 

 

*For outdoor installations that require mounting the antenna horizontally facing  ground, please contact MTI representative for the dedicated P/N

 

 

Azimuth Radiation Pattern Midband

 Freq. 0.915 GHz

Elevation Radiation Pattern Midband

Freq. 0.915 GHz

 
 

  

 

WAIVER!

While the information contained in this document has been carefully compiled to the best of our present knowledge, it is not intended as presentation or warranty of any kind on our part regarding the fitness of the products concerned for any particular use or purpose and neither shall any statement contained herein be construed as a recommendation to infringe any industrial property rights or as a license to use any such rights. The fitness of each product for any particular purpose must be checked beforehand with our specialists.

Print