Find Antenna
Find Military Product Choose Frequency
From To
Choose Antenna Type
MT-262031/TRH/A/K
902 - 928 MHz, 7.5 dBic RHCP READER ANTENNA
ELECTRICAL
REGULATORY COMPLIANCE RoHS, CE 0682
FREQUENCY RANGE 902 - 928 MHz
VSWR 1.3 :1 (typ) , 1.5 : 1(max)
POLARIZATION RHCP
3dB ELEVATION BEAMWIDTH 72° (typ)
3dB AZIMUTH BEAMWIDTH 77° (typ)
F/B RATIO -14 dB (typ)
POWER 6W (max)
INPUT IMPEDANCE 50 (ohm)
AXIAL RATIO AT BORESIGHT 3.5 dB (max)
AXIAL RATIO @ ± 20º 3.5dB (typ) 4dB (max)
LIGHTNING PROTECTION DC Grounded
MECHANICAL
DIMENSIONS (LxWxD) 190 x 190 x 30 mm (max)
CONNECTOR TNC female Reverse polarity
WEIGHT 0.8 (Kgs) (max)
RADOME MATERIAL Plastic
MTBF 20 years
BASE PLATE MATERIAL Aluminum with chemical conversion coating
OUTLINE DRAWING RD42491100C
ENVIRONMENTAL
TEST STANDARD DURATION TEMPERTURE NOTES
LOW TEMPERATURE IEC 68-2-1 72 h -40°C
LOW TEMPERATURE OPERATION  IEC 68-2-1A  72 h   -40°C    
HIGH TEMPERATURE IEC 68-2-2 72 h +85°C
HIGH TEMPERATURE OPERATION    72 h  +65°C    
TEMP. CYCLING IEC 68-2-14 1 h -45°C +70°C 3 Cycles

THERMAL SHOCK

NON-OPERATING

-40°C to +65°C 3 Cycles 
HUMIDITY ETSI EN300-2-4 T4.1E 24 h

95%

5 Cycles

DUST AND WATER TIGHTNESS IEC 529 IP67
SOLAR RADIATION  ASTM G53  1000h    
FLAMMABILITY  UL 94      Class HB
SALT SPRAY IEC 68-2-11 Ka 500h    
MECHANICAL SHOCK

IEC 68-2-32

IEC 68-2-27 

  10ms

HALFSINE

  6x100g
THERMAL SHOCK RESISTANCE     -40°C +850°C 

6 Cycles

 

POWERED THERMAL CYCLING     -40°C to +65°C 

30 Cycles

POWERED VIBRATION ENDURANCE IEC 68-2-6A   SEE TABLE BELOW   COMPLY BY DESIGN 

 

 

 

*For outdoor installations that require mounting the antenna horizontally facing  ground, please contact MTI representative for the dedicated P/N

 

 

Azimuth Radiation Pattern Midband

 Freq. 0.915 GHz

Elevation Radiation Pattern Midband

Freq. 0.915 GHz

 
 

  

 

 

WAIVER!

While the information contained in this document has been carefully compiled to the best of our present knowledge, it is not intended as presentation or warranty of any kind on our part regarding the fitness of the products concerned for any particular use or purpose and neither shall any statement contained herein be construed as a recommendation to infringe any industrial property rights or as a license to use any such rights. The fitness of each product for any particular purpose must be checked beforehand with our specialists.

Print