Find Antenna
Find Military Product Choose Frequency
From To
Choose Antenna Type
MT-263021/TRLH/A
902-928 MHz, 11 dBic DUAL LHCP+RHCP READER ANTENNA
ELECTRICAL
REGULATORY COMPLIANCE RoHS, CE 0682
FREQUENCY RANGE 902 - 928 MHz
GAIN 11 dBic (min)
VSWR 1.5 : 1 (max) 1.3 : 1 ( typ)
POLARIZATION DUAL RHCP+LHCP
3dB ELEVATION BEAMWIDTH 30º (typ)
3dB AZIMUTH BEAMWIDTH 63° (typ)
SIDELOBES LEVEL -12 dB (max) -15 dB (typ)
F/B RATIO -20 dB (max)
ISOLATION 30dB (min)
POWER 6W (max)
INPUT IMPEDANCE 50 (ohm)
AXIAL RATIO 3dB BEAMWIDTH AZ: 3dB (max) @ ± 30º
EL 3dB (max) @ ± 12º 3.5 dB (max) @ ± 15º
LIGHTNING PROTECTION DC Grounded
MECHANICAL
DIMENSIONS (LxWxD) 1220x320x35 mm (max)
CONNECTOR 2 x TNC Female Reverse polarity
WEIGHT 5.4 Kg (max)
MOUNTING KIT SEE RD41191800C
RADOME MATERIAL Plastic UV Resistant per ETSI 300
OUTLINE DRAWING RD41893300C
ORIENTATION Rectangular
ENVIRONMENTAL
TEST STANDARD DURATION TEMPERTURE NOTES
LOW TEMPERATURE IEC 68-2-1 72 h -55°C
HIGH TEMPERATURE IEC 68-2-2 72 h +71°C
TEMP. CYCLING IEC 68-2-14 1 h -45°C +70°C 3 Cycles
 

THERMAL SHOCK   

NONO-OPERATING
    -30°C to+70°C   Ramp 30°C/min
HUMIDITY ETSI EN300-2-4 T4.1E   144 h   95%
WATER TIGHTNESS IEC 529 IP54
DUST RESISTANCE       IP54
SOLAR RADIATION  ASTM G53 1000h    
OZONE RESISTANCE ETSI 300      
FLAMMABILITY UL 94     Class HB
QUASI RANDOM VIBRATION 20g rms for 4 hours

VEHICLE VIBRATION

OPERATING

1 grms, 10-500 Hz, in 3 axis

    6 hours total, 2 hr in each axis. Accelerated wear – an additional 50hrs in worst case axis.

MECHANICAL SHOCK   

OPERATING
10g,11msec,  half sine pulse    

 

Azimuth Radiation Pattern Midband

 Freq. 0.915 GHz

Elevation Radiation Pattern Midband

Freq. 0.915 GHz

 
 
 
 
 

  

 

WAIVER!

While the information contained in this document has been carefully compiled to the best of our present knowledge, it is not intended as presentation or warranty of any kind on our part regarding the fitness of the products concerned for any particular use or purpose and neither shall any statement contained herein be construed as a recommendation to infringe any industrial property rights or as a license to use any such rights. The fitness of each product for any particular purpose must be checked beforehand with our specialists.

Print
The information on this web site is disclosed pursuant to Rule 26 of the AIM Rules for Companies