Directional (CPE) Antennas
MT-483010/S
4.9-5.875 GHz 13dBi LINEAR V/H POLARITY INDOOR UNIT ANTENNA |
|
.JPG)
|
| ELECTRICAL |
| FREQUENCY RANGE |
4.9 – 5.875 GHz
|
| GAIN |
12 dBi (min) @ 4.9-5.15 GHz
13 dBi (min) @ 5.15-5.875 GHz
|
| VSWR |
2 :1 (max)
|
| POLARIZATION |
Linear (Vertical or Horizontal)
|
| 3dB ELEVATION BEAMWIDTH |
18°(typ)
|
| 3dB AZIMUTH BEAMWIDTH |
60° (typ)
|
| ELEVATION SIDELOBE LEVEL |
-10 dB (typ.)
|
| F/B RATIO |
-20 dB (max)
|
| INPUT IMPEDANCE |
50 (ohm)
|
| MECHANICAL |
| DIMENSIONS (LxWxD) |
325x92x15mm (max)
|
| CONNECTOR |
SMA Female
|
| AZIMUTH ADJUSTMENT |
± 45°
|
| TILT ADJUSTMENT |
±15°
|
| PLASTIC MATERIALS |
P.C+ABS
|
| WEIGHT |
0.6(kg) (max) without cable
|
| RF CABLE ACCESSORIES |
See Below
|
| INSTALLATION OPTION |
See Below
|
| OUTLINE DRAWING |
RD41522000C
|
|
| ENVIRONMENTAL |
| TEST |
STANDARD |
DURATION |
TEMPERTURE |
NOTES |
| LOW TEMPERATURE |
IEC 68-2-1 |
72 h |
-20°C |
|
| HIGH TEMPERATURE |
IEC 68-2-2 |
72 h |
+55°C |
|
| TEMP. CYCLING |
IEC 68-2-14 |
1 h |
-10°C +55°C |
3 Cycles |
| VIBRATION |
IEC 60721-3-4 |
30 min/axis |
|
Random4M3 |
| SHOCK MECHANICAL |
IEC 60721-3-4 |
|
|
4M3 |
| HUMIDITY |
ETSI EN300-2-4 T4.1E |
144 h |
|
50% |
| WATER TIGHTNESS |
IEC 529 |
|
|
IP32 |
| SOLAR RADIATION |
ASTM G53 |
1000h |
|
|
| FLAMMABILITY |
UL 94 |
|
|
VO |
INSTALLATION
3 Vacuum cap for window installation (Supplied with antenna)
Table position (A dummy load supplied with antenna)
Adhesive tape for window installation (Tape not supplied with antenna)
Wall installation with screws (Hardware not supplied with antenna)
| # |
MTI P/N |
Cable length |
Free End conn |
Attenuation @ 3.5GHz |
| 1 |
MT-850002/S/A |
2 Meter |
SMA Female |
4.4 dB |
| 2 |
MT-850002/S/B |
3 Meter |
SMA Female |
6.5 dB |
|
|
Azimuth Radiation Pattern Midband
Freq. 5.47 GHz |
Elevation Radiation Pattern Midband
Freq. 5.47 GHz |
|
|
| |
WAIVER!
While the information contained in this document has been carefully compiled to the best of our present knowledge, it is not intended as presentation or warranty of any kind on our part regarding the fitness of the products concerned for any particular use or purpose and neither shall any statement contained herein be construed as a recommendation to infringe any industrial property rights or as a license to use any such rights. The fitness of each product for any particular purpose must be checked beforehand with our specialists. |
Print
|
.jpg)
